DANGERS & WARNINGS
⚠️ Pristine Auto Detailing –
Water Spot Eliminator Gel (Sulfuric Acid Formula)
🧪 Hazard Classification (GHS/OSHA)
Corrosive to Metals – Category 1
Skin Corrosion / Irritation – Category 1A
Serious Eye Damage / Irritation – Category 1
Acute Toxicity (Oral & Inhalation) – Category 4
DANGER
Causes severe skin burns and serious eye damage.
Harmful if swallowed, inhaled, or comes in contact with skin.
May be corrosive to metals.
Reacts violently with water and organic materials.
Produces toxic fumes when mixed with other chemicals.
Exposure may cause permanent tissue damage, blindness, or respiratory injury.
🧤Precautionary Statements
Prevention
Wear protective gloves, chemical-resistant clothing, and eye/face protection.
Handle only in well-ventilated areas.
Keep away from children and pets.
Do not eat, drink, or smoke when using this product.
Use only on cool, painted, or coated surfaces.
Avoid contact with aluminum, zinc, chrome, or raw metals.
Do not mix with bleach, alkaline cleaners, or other chemicals.
Store tightly closed, upright, and away from heat or sunlight.
Response / First Aid
IF ON SKIN (or hair): Remove contaminated clothing. Rinse with water for 15–20 minutes. Seek medical attention.
IF IN EYES: Rinse cautiously with water for at least 15 minutes. Remove contact lenses if present. Get immediate medical attention.
IF INHALED: Move to fresh air. Keep comfortable. Seek medical attention if irritation persists.
IF SWALLOWED: Rinse mouth. Do NOT induce vomiting. Drink water if conscious and seek immediate medical attention.
IF ON CLOTHING: Remove and rinse thoroughly before reuse.
Storage
Store locked up, upright, in a cool, dry, well-ventilated place.
Keep separate from bases, oxidizers, flammables, and metals.
Disposal
Dispose of contents and container according to local, state, and federal regulations.
Do not pour into drains or the environment.
Chemical Composition
Active Ingredient: Sulfuric Acid (CAS 7664-93-9)
Additional non-hazardous stabilizers and surfactants (proprietary blend)
🔥
Fire / Reactivity
Not flammable, but reacts exothermically with water and metals, releasing hydrogen gas.
Avoid contact with oxidizers, strong bases, and organic materials.
In case of fire nearby, use CO₂, dry chemical, or foam—never apply water directly to spilled acid.
🧍♂️
Health Effects
Inhalation: Coughing, choking, respiratory tract inflammation, possible pulmonary edema.
Eyes: Immediate pain, tearing, blurred vision, permanent damage or blindness.
Skin: Rapid burning and deep ulceration.
Ingestion: Severe internal injury; may be fatal.
Safe Handling Tips
Wear nitrile or neoprene gloves (not latex).
Keep a bucket of clean water nearby.
Apply small amounts to prevent runoff.
Do not allow product to dwell more than 60 seconds.
Rinse thoroughly before wiping.
Avoid windy conditions to prevent mist drift.
Never reuse or unlabeled containers.
⚗️
Incompatibilities
Avoid mixing with:
Bleach (sodium hypochlorite) → chlorine gas
Ammonia or alkaline cleaners → violent reaction
Alcohols or solvents → excess heat and splatter
Metals (aluminum, zinc, copper, chrome)
Other acids or oxidizers
🌎
Environmental Hazards
Toxic to aquatic life if released into waterways.
Neutralize and dilute before disposal.
Prevent spills from entering drains, soil, or bodies of water.
Storage & Transport
Keep below 120 °F (49 °C).
Do not freeze.
Store in HDPE or acid-resistant containers.
Transport upright, sealed, and in secondary containment.
Regulatory Compliance
Complies with:
OSHA 29 CFR 1910.1200 (Hazard Communication Standard)
GHS (Globally Harmonized System)
CPSC Consumer Chemical Labeling
DOT 49 CFR 173.136 (Corrosive Materials)
DOT Info: Sulfuric Acid Solution • UN1830 • Hazard Class 8 • Packing Group II